SciCan HYDRIM L110w Operator's Manual download pdf (Page 23)

7.Troubleshooting

Instruments are

not clean

Touchscreen /

Unit does not come on

The wash arms

do not rotate

The door cannot be

opened

Operating cycles appear

to be taking too long

to complete

“No detergent” message

comes on when there is still

chemical left in the container

Drying Performance is

inadequate

Possible Causes and SolutionsProblem

• Do not overload cassettes or instrument baskets.

• Do not load too many cassettes into the Hydrim.

• Use the Heavy Duty cycle for cassettes and hinged

instruments.

• Check filters and wash arms for debris.

• Ensure that the power button is turned ON.

• Ensure that the plug is properly inserted into the wall

socket.

• Check if a fuse or circuit is blown – call service

for assistance.

• Remove the wash arms, clean and reinstall them.

• The cycle is not complete.

• The cycle was aborted and the unit has not

completed draining yet.

• The water is not hot enough. Check that the incoming

hot water temperature is in the recommended range.

• Check that the hot and cold hoses are not reversed.

• Check for a kink in chemical tubing.

• Increase the drying time (user menu).

NOTE: Fuses should NOT be replaced by the operator. Call an authorized service technician for assistance.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

No comments

SciCan HYDRIM L110w Operator's Manual Page 23